MENU

aluminium alloy 6061 t6 specificaties

Standard Specification for Aluminum-Alloy 6061-T6 Standard

This specification covers extruded 6061-T6 aluminum-alloy standard structural profiles. Formerly under the jurisdiction of Committee B07 on Light Metals and Alloys, this specification was withdrawn in January 2019 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees , which requires that standards shall be updated by the end of the eighth year since the

Quotation

aluminum 6061 Product Guide from Online Metals

6061 Aluminum is, by any measure, the most commonly used aluminum alloy in the world. It is usefil in almost any application due to its strength, heat treatability, comparatively easy

Quotation

aluminum 6061 t6 spec sheet - aluminum-alloy

Availability Aluminium Alloy 6061 Sheet, Plate, Wire, Rod, Bar (Hexagon, Round, Square), Tube and extrusions. 6061 Foil (Shim) is available in various thicknesses. Chat Now Send Inquiry 6061 Aluminum Sheet, Unpolished (Mill) Finish, T6.

Quotation

Aluminum Alloy 6061 - Information and Specifications

GENERAL DESCRIPTION: ALLOY 6061. 6061 is a precipitation hardening alloy, containing magnesium and silicon as its major alloying elements. Originally called “Alloy 61S”, it was developed in 1935. It has good mechanical properties and exhibits good weldability. It is one of the most common alloys for general purpose use. 6061 can be heat treated.

Quotation

6061 Aluminium Alloy / Alumimum 6061 - Aircraft Materials

Aluminum 6061 is an extremely versatile heat treatable aluminum alloy due to its content of silicon and magnesium. 6061 has a wide range of mechanical and corrosion resistance properties as well as having most of the good qualities of aluminum.

Quotation

Aluminium Alloy - Commercial Alloy - 6061 - T6 Extrusions

Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone. It has medium fatigue strength. It has good cold formability in the temper T4, but limited formability in T6 temper.

Quotation

Aluminum 6061-T6; 6061-T651 - asm.matweb

The T8 and T9 tempers offer better chipping characteristics over the T6 temper. Applications: Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts; bike frames.

Quotation
[PDF]

Alcoa Engineered Products ALLOY 6061 - Caltech Astronomy

Alcoa produces 6061 alloy with a wide selection of standard and special tempers. In the annealed condition (-O temper), 6061 is extremely ductile and well suited for severe forming applications.

Quotation

6061 aluminium alloy - Wikipedia

OverviewQuotation

aluminum 6063 t6 specification - aluminum-alloy

aluminum 6063 t6 specification . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

Quotation

Differences of Common “T” Temper Designations for 6061

Jan 27, 2017· Differences of Common “T” Temper Designations for 6061 Alloy Aluminum. 1/27/2017. Manufacturing job shops typically interpret a material specification of “ALUMINUM 6061-T6” as allowing 6061-T6, -T651 or -T6511. All of these are acceptable tempers, and are permitted for most applications. But, from years of experience, this is not

Quotation

Aluminium Alloy - Commercial Alloy - 6061 - T6 Extrusions

6061 - T6 Extrusions. Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone.

Quotation

Alloy 6061 T6 Technical Information - Robert James Sales

Piping Definitions Tube Stainless Steel Alloys Specifications Conversion 6061 T6 904L 410 304/304L 316/316L Alloy 200 Alloy 400 Alloy 600 Alloy 625 Alloy 800/800H/800HP Alloy 825: 6061 T6 Chemical Composition % ASTM B221, B361, B247. DESCRIPTION Aluminum has been proven to be the economical choice for a wide variety of applications.

Quotation

Aluminum 6061, UNS A96061, Aluminum 6061, 6061 Alloy, 6061

California Metal & Supply is a leading supplier of quality 6061 Aluminum (UNS A96061) in 6061 Aluminum Sheet, 6061 Aluminum Plate, 6061 Aluminum Bar . Aluminum 6061 is one of the most versatile of the heat treatable alloy group.

Quotation

6061 Aluminum vs. 6063 Aluminum Alloy Eagle Mouldings

Aluminum Alloy 6061. Aluminum 6061 is a precipitation-hardened alloy, meaning it is strengthened during a heat treatment process that involves the disbursement of particles within the metal’s grain structure, hindering motion and effectively increasing strength and durability.

Quotation

6061-T6 Aluminum vs. 6082-T6 Aluminum :: MakeItFrom

Both 6061-T6 aluminum and 6082-T6 aluminum are aluminum alloys. Both are furnished in the T6 temper. They have a very high 99% of their average alloy composition in common. There are 31 material properties with values for both materials. Properties with values for

Quotation
[PDF]

Aluminum 6061-T6; 6061-T651

General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available. The T8 and T9 tempers offer better chipping characteristics over the T6 temper.

Quotation

6061-T6 Aluminum Properties - hydro

The common grades of commercial 6061 aluminum are 6061-0, 6061-T4, and 6061-T6; however, tempers up to -T9 are produced. At Hydro Extrusion, we produce 6061 aluminum in a wide selection of tempers for use in standard and custom solid and hollow shapes, rod and bar products and seamless and structural pipe and tube, for use in an extensive variety of applications.

Quotation

6061 aluminium alloy - Wikipedia

6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063 ).

Quotation
[PDF]

alloy data sheet 6061 0605 00 - Nedal Aluminium

structural alloy Nedal Aluminium Alloy data sheet jun-2005 P.O.-Box 2020 EN AW-6061 NL-3500 GA Utrecht, The Netherlands rev.00 T. +31 30 2925711 F. +31 30 2939512 [email protected] nedal The alloy EN AW-6061 is a high strength alloy for highly loaded structural applications.

Quotation

ASTM-B308 Standard Specification for Aluminum-Alloy 6061

1.1 This specification covers extruded 6061-T6 aluminum-alloy standard structural profiles. 1.2 The profiles are limited to I-beams, H-beams, channels, angles, tees, and zees. Note 1—For other extruded profiles in other alloys and tempers refer to Specification B221.

Quotation

Aluminium / Aluminum 6061 Alloy (UNS A96061) - AZoM

Aluminium / Aluminum 6061 alloy has good machinability in harder T 4 and T6 tempers. It can be machined in annealed temper. Forming. Aluminium / Aluminum 6061 alloy can be easily formed and worked in the annealed condition. The standard methods are used to perform bending, stamping, deep drawing, and spinning operations. Welding

Quotation

6061-T6 Aluminium - The Ultimate Guide EngineeringClicks

Aluminium 6061-T6 is a subcategory of the 6061 aluminium alloy, one of the most widely used aluminium alloy categories in the world.The alloy is appreciated because of its versatile performance and all-around mechanical properties.The “T6” part of the 6061-T6 name indicates the type of the tempering treatment process that this aluminium alloy type undergoes.

Quotation
[PDF]

Aluminum 6061 -T6; 6061 -T651

General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available. The T8 and T9 tempers offer better chipping characteristics over the T6 temper.

Quotation

6061-T6 Aluminum Properties

6061-T6 aluminum properties include its structural strength and toughness. 6061 T6 aluminum is commonly used in aircraft construction. Contact Hydro Extrusion for more information on 6061-&6 and the other alloys we extrude and shape for our customers.

Quotation

6061-T6 Aluminium - The Ultimate Guide EngineeringClicks

Aluminium 6061-T6 is a sub-category of the 6061 alloy, one of the most widely used aluminium alloys The 6061-T6 alloy is used in applications where high strength to low weight ratios are critical such as the aircraft and aerospace industries. It is the way the base Aluminium 6061 is treated that give Aluminium 6061-T6 it particular characteristics.

Quotation

Datasheets - Aluminium Alloy - Commercial Alloy - 6061

Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone. It has medium fatigue strength. It has good cold formability in the temper T4, but limited formability in T6 temper.

Quotation
[PDF]

Aluminum 6061 -T6; 6061 -T651

General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available. The T8 and T9 tempers offer better chipping characteristics over the T6 temper.

Quotation
[PDF]

Technical Data ROD & BAR ALLOY 6061

T6, T651 B A C C A A A A A COMPARATIVE CHARACTERISTICS Weldability4 Stress2 ROD & BAR ALLOY 6061 Technical Data Cold Finished Extruded ASTM B221 AMS-QQ-A-200/8 AMS 4150 AMS 4160 AMS 4161 AMS 4172 AMS 4173 APPLICABLE SPECIFICATIONS Others Weight % Minimum Maximum CHEMICAL COMPOSITION LIMITS Si 0.40 0.80 Fe 0.70 Cu 0.15 0.40 Mn 0.15 Mg 0.80 1

Quotation

6061 Aluminum plate - AMS 4027 - 6061-T651 plate

6061 Aluminum plate is one of the most versatile of the heat-treatable alloys. Commonly used for flooring, ramps and stairs, Type 6061-T651 is popular for its medium to high strength requirements, good toughness and excellent corrosion resistance.

Quotation

6061-T6 Aluminum vs. 6061-T651 Aluminum :: MakeItFrom

Both 6061-T6 aluminum and 6061-T651 aluminum are variants of the same material. They share alloy composition and many physical properties, but develop different mechanical properties as a result of different processing. For each property being compared, the top bar is 6061-T6 aluminum and the bottom bar is 6061-T651 aluminum.

Quotation

6061 Aluminum Bar Stock - Flats, Squares and Round Bars

6061 (UNS A96061) is an aluminum bar with cold finished or extruded aluminum wrought product with excellent corrosion resistance, good workability, fabulous joining characteristics and adequate machinability. 6061 is one of the most widely used heat treatable aluminum alloys.

Quotation

6061 aluminium alloy - Wikipedia

6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminum for general-purpose use.

Quotation

ASM Material Data Sheet

General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available. The T8 and T9 tempers offer better chipping characteristics over the T6 temper.

Quotation

6061-T6511 Aluminum :: MakeItFrom

The graph bars on the material properties cards below compare 6061-T6511 aluminum to: 6000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Quotation

Difference of AA 6061-T6 & AA 6063-T5 - Sunshield Aluminum

Aluminum Alloy 6061-T6 is a precipitation-hardened aluminum alloy containing magnesium and silicon as its major alloying elements, which are originally called “Alloy 61S”. AA 6063-T5 is another aluminum alloy which containing the same alloying elements as AA 6061-T6.

Quotation

Alloy 6061 T6 Technical Information - Robert James Sales

Aluminum melts at a temperature of 1220 deg.F. (or 660 deg.C). The ability of aluminum to transmit heat rapidly and efficiently makes it an ideal material for heat

Quotation

Aluminum Drawn Seamless Tubing in Grade 6061-T6.

Dover Tubular Alloys inventories a wide variety of aerospace and commercial grade Aluminum Drawn Seamless Tubing in grade 6061-T6. This tubing goes into end-use markets such as Energy, Aerospace, Marine, Automotive, and Healthcare. 6061-T6 Drawn Seamless Tubing is a popular choice when weight is a determining factor in end-use application. Drawn.

Quotation

ASTM B221, ASTM B241, ASTM B429 6061 T6 Aluminum Pipe

ASTM B241 6061 T6 aluminum tube 6061 aluminum pipe is a magnesium and silicon alloyed aluminum material. This good all-purpose alloy has good corrosion resistance and formability and has

Quotation

Aluminum Alloy, Forgings and Rolled Or Forged Rings, (6061

Aluminum Alloy, Forgings and Rolled Or Forged Rings, (6061-T6) Solution and Precipitation Heat Treated AMS4127 This specification covers an aluminum alloy in the form of die forgings, hand forgings, forged rings, rolled rings, and stock for forgings and rings.

Quotation

ASTM B221 Grade 6063 T6 ALUMINUM ALLOY TUBE,6063 T6

Aluminum Alloy Round Tube is made of 6063 T6. Through anodizing, Aluminum Alloy Round Tube with smooth surface is unnecessary for further repainting process. Aluminum Alloy Round Tube with great quality, lightweight, and anti-corrosion.

Quotation

ASTM-B308 Standard Specification for Aluminum-Alloy 6061

1.1 This specification covers extruded 6061-T6 aluminum-alloy standard structural profiles. 1.2 The profiles are limited to I-beams, H-beams, channels, angles, tees, and zees. Note 1—For other extruded profiles in other alloys and tempers refer to Specification B221.

Quotation

Aluminium 6061-T6 vs Aluminium 6063-T5

Jun 24, 2017· AA (Aluminium Alloy) 6061-T6 is an aluminium alloy which is precipitation-hardened. Precipitation hardening is a heat treatment technique which increases the yield strength of the malleable materials, including most alloys of aluminium. AA 6061-T6 contains magnesium and silicon as the alloying elements which occupy a major stake in its making.

Quotation

Datasheets - Aluminium Alloy - Commercial Alloy - 6061

Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone. It has medium fatigue strength. It has good cold formability in

Quotation

What are 6061-T4 and -T6 aluminum plates? - Quora

Jun 14, 2017· 6061 aluminum plate is a precipitation-hardened aluminium alloy sheet, containing magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in populari.

Quotation

Aluminum 6061-T6; 6061-T651 - MatWeb

Metal; Nonferrous Metal; Aluminum Alloy; 6000 Series Aluminum Alloy. Material Notes: General 6061 characteristics and uses: Excellent joining characteristics, good acceptance of applied coatings. Combines relatively high strength, good workability, and high resistance to corrosion; widely available.

Quotation

Aluminium / Aluminum 6061 Alloy (UNS A96061) - AZoM

Aluminium / Aluminum 6061 alloy has good machinability in harder T 4 and T6 tempers. It can be machined in annealed temper. Forming. Aluminium / Aluminum 6061 alloy can be easily formed and worked in the annealed condition. The standard methods are used to perform bending, stamping, deep drawing, and spinning operations. Welding

Quotation

Aluminium Alloy Specification BS1490 Table Investacast

A typical aircraft seat can vary between 10 kg (economy) to over 20 kg (wide-body) in weight. With seat masses between 1200kg and 14000kg, it is apparent lighter seat designs are critical to an airline's commercial performance, particularly when fuel prices escalate.

Quotation

Aluminium Alloy 6061 - Quantum Alloys

Aluminium alloy 6061 is supplied solution treated and artificially aged to T6 temper. Aluminium alloy 6061 has excellent joining characteristics, good acceptance of applied coatings, combines relatively high strength with good workability, and high resistance to corrosion; available in T6 condition.

Quotation
[PDF]

Technical Data ROD & BAR ALLOY 6061

ROD & BAR ALLOY 6061. kaiseraluminum KA-RBH-6061-8.10. Technical Data. Generally selected where welding or brazing is required or for its high corrosion resistance in all tempers. Formability is excellent in O temper and good in the T4 temper. Machining is more diffi cult when compared to the other machining alloys.

Quotation

Aluminium Alloys - Aluminium 6005 / 6005A Properties

Apr 19, 2005· Alloy 6005/6005A has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys but 6005/6005A has better extrusion characteristics. It has a better mill surface finish, but it is difficult to produce thin-wall complicated shapes in 6005/6005A. 6005/6005A tube has very good bending properties.

Quotation

Aluminum T6 vs. T6511 - Finishing

Aluminum T6 vs. T6511. To get to the -T6 temper, the 6061 is heated to about 990 °F, then quenched in water, then aged at about 350 °F for around 8 hours. That changes the typical yield strength from 8 ksi to about 40 ksi- fairly substantial. But that quenching in water puts residual stresses in the aluminum, since there is a surface-to-center.

Quotation